How to Care for Caesarstone Quartz Worktops
For everyday care, clean Caesarstone quartz with warm water, mild detergent and a soft cloth or non-abrasive scourer. Always rinse the surface thoroughly and dry it with a soft cloth or paper towel to help reduce water marks, streaks and patina.
This guide is written for residential customers with Caesarstone quartz, mineral and fusion surfaces installed internally as kitchen worktops, countertops or splashbacks.
Warm water and mild detergent
Rinse and dry after cleaning
Wipe wet spills promptly
Use trivets and chopping boards
Everyday Cleaning for Caesarstone Quartz
For normal day-to-day cleaning, wipe the Caesarstone surface with a soft cloth or a non-abrasive scourer dipped in warm water mixed with a mild detergent. Rinse the surface thoroughly with clean water and dry it with a soft cloth or paper towel.
Always wipe up wet spills and splashes promptly. This helps prevent patina build-up, which can sometimes look like a light-coloured stain on the surface.
- Wipe the worktop with warm water, mild detergent and a soft cloth or non-abrasive scourer.
- Clean spills promptly, especially around sinks, kettles, coffee machines and food preparation areas.
- Rinse away cleaner residue with clean water.
- Dry the worktop with a soft cloth or paper towel to reduce streaks, water marks and patina.
- Test any new cleaning product on a small hidden area before using it across the visible worktop.
Quick Caesarstone Care Guide
Daily Cleaning
Use warm water, mild detergent and a soft cloth. Rinse thoroughly and dry the surface afterwards.
Spills & Patina
Wipe wet spills quickly. Patina can build up if liquids, soap residue or cleaning products are left to dry on the worktop.
Heat Protection
Caesarstone is durable, but prolonged or extreme heat can affect quartz. Always use heat mats, trivets or pan stands.
Important: Care and Maintenance Can Affect Your Warranty
Caesarstone’s residential warranty requires the product to be used and maintained in line with Caesarstone care and maintenance guidance. Using unapproved chemicals, coatings, natural stone cleaners, toners or sealers can damage the surface and may void the manufacturer warranty.
Removing Marks, Stubborn Stains and Dried Spills
Most everyday spills can be cleaned using mild detergent or cleaner and water. For stuck-on materials, gently remove the excess with a plastic putty knife or non-scratch pad before wiping with warm water.
Stubborn Stains
Gently rub the area with a soft cloth or paper towel and an approved cleaner. Clean a larger area rather than just the stain itself, working in a circular motion. Rinse with water, dry with a soft cloth or paper towel, and repeat if the stain is still visible.
Dried Spills
Re-wet dried spills and stains with water for several minutes first. Caesarstone’s guidance refers to applying CIF Cream with Bleach in a circular motion, then cleaning the surface with a damp cloth or paper towel. Always rinse and dry afterwards.
Rust and Metal Marks
For rust or metal marks, Caesarstone’s guidance refers to using a small amount of Bar Keepers Friend Power Spray or oxalic acid on a damp cloth. Do not use an abrasive scourer. Wipe very gently in a circular motion, rinse thoroughly with warm water and dry with a soft cloth or paper towel.
Test First
Always check a cleaning product on an inconspicuous area first. If you are unsure whether a cleaner is safe for Caesarstone quartz, contact Finch’s Stone & Marble Ltd or Caesarstone before applying anything harsh, acidic, abrasive or chemical-based.
Polished, Honed, Concrete and Rough Finishes
Caesarstone polished finishes are usually the easiest to maintain. Honed, Concrete and Rough finishes can need more regular cleaning, and everyday marks such as fingerprints, metal marks and signs of daily use may be more visible.
Many of these marks can be removed with careful cleaning and suitable non-abrasive products. Avoid harsh scrubbing, abrasive pads and unsuitable chemicals, especially on darker colours and textured finishes where marks can show more easily.
What to Do and What to Avoid
Do
- Use warm water, mild detergent and a soft cloth for everyday cleaning.
- Rinse thoroughly after using cleaning products.
- Dry the surface after cleaning to help reduce patina and water marks.
- Wipe up wet spills promptly.
- Use chopping boards when preparing food.
- Use heat mats, trivets and pan stands for hot cookware and appliances.
- Use a plastic scraper or non-scratch pad for stuck-on food or residue.
Don’t
- Do not use abrasive scourers, harsh powders or aggressive scrubbing.
- Do not leave liquids, soaps or cleaning products to dry on the surface.
- Do not cut directly on the worktop.
- Do not place hot pans, oven trays, air fryer baskets or slow cookers directly on the quartz.
- Do not drag heavy pans, trays or appliances across the surface.
- Do not use natural stone sealers, toners, waxes or unapproved topical coatings.
- Do not use the worktop outdoors, around fireplaces or for purposes outside Caesarstone’s intended use.
Heat, Scratches and Everyday Protection
Caesarstone quartz is hard-wearing and suitable for busy kitchens, but it is not indestructible. The surface is highly scratch-resistant, not scratch-proof, so chopping boards should be used for food preparation.
Heat Protection
Avoid prolonged or extreme heat exposure. Do not put hot pans, oven trays, hot dishes, air fryer baskets, slow cookers or other heated appliances directly onto the worktop. Use a trivet, heat mat or pan stand every time.
Scratch and Impact Protection
Do not cut directly on the surface, and avoid knocking heavy objects against the worktop edges. Chips, scratches, impact marks and damage from excessive force are not usually treated as material defects under the Caesarstone residential warranty.
Does Caesarstone Quartz Need Sealing?
Caesarstone quartz should not be treated like marble, granite or other natural stones. Do not apply natural stone sealers, toners, waxes or topical coatings. Caesarstone’s warranty terms specifically prohibit unapproved chemicals and coatings because they may damage the surface.
The best protection is simple daily cleaning, prompt spill removal, proper rinsing and drying, and using chopping boards and trivets as part of everyday kitchen use.
Care Advice After Installation
After your Caesarstone worktops have been installed, allow silicone, joints and surrounding areas to settle as advised by your fitter. Avoid heavy cleaning around fresh silicone on the day of installation unless instructed otherwise.
- Check the worktops after fitting and ask any care questions before the fitters leave.
- Keep your Finch’s Stone & Marble Ltd invoice as proof of purchase.
- Register your Caesarstone warranty using Caesarstone’s official online registration page.
- Use chopping boards and heat mats from day one.
- Contact Finch’s Stone & Marble Ltd if you are unsure which cleaning product is safe to use.
Caesarstone Quartz Care & Cleaning FAQs
What is the best way to clean Caesarstone quartz worktops?
For everyday cleaning, use warm water, mild detergent and a soft cloth or non-abrasive scourer. Rinse thoroughly with clean water and dry with a soft cloth or paper towel.
How do I remove stubborn stains from Caesarstone?
Gently clean a larger area than the stain itself using a soft cloth or paper towel and an approved cleaner. Work in a circular motion, rinse with water, dry the surface and repeat if needed.
What should I do with dried spills?
Re-wet the dried spill with water for several minutes before cleaning. Caesarstone’s guidance refers to CIF Cream with Bleach for dried spills, used carefully in a circular motion, followed by cleaning with a damp cloth or paper towel.
Can I use bleach on Caesarstone quartz?
Do not assume that every bleach or strong chemical product is suitable. Caesarstone’s care guidance mentions specific products for certain marks, but any cleaner should be used carefully, tested first on a hidden area, rinsed thoroughly and dried afterwards.
Can I put hot pans on Caesarstone quartz?
No. Caesarstone is durable, but prolonged or extreme heat can affect quartz surfaces. Always use a trivet, heat mat or pan stand for hot pans, oven trays and heated appliances.
Can I cut directly on Caesarstone quartz?
No. Caesarstone is highly scratch-resistant but not scratch-proof. Always use a chopping board to protect the worktop and avoid blunting knives.
Does Caesarstone quartz need sealing?
No. Do not apply natural stone sealers, toners, waxes or unapproved topical coatings. These products can damage the surface and may void the Caesarstone residential warranty.
Do dark, honed or concrete Caesarstone finishes need different care?
They may need more regular cleaning than polished finishes. Fingerprints, metal marks and signs of daily use can be more visible on Honed, Concrete and Rough finishes, especially darker colours.
Who should I contact if I am unsure about a cleaning product?
If Finch’s Stone & Marble Ltd supplied your Caesarstone worktops, contact us first. You can also contact Caesarstone UK on 0208 216 6100 or email info@caesarstone.co.uk for manufacturer advice.
Need Help With Caesarstone Quartz Worktops?
Finch’s Stone & Marble Ltd supply, template, fabricate and install Caesarstone quartz worktops for homes across Wigan, Lancashire, Greater Manchester, Cheshire, Merseyside and the wider North West. If you need advice about Caesarstone care and cleaning, have a question about an existing worktop, or would like a quotation for a new kitchen worktop, our team will be happy to help.
From our workshop in Appley Bridge, Wigan, we work with residential customers, kitchen companies and local trades throughout the North West, offering practical advice and professional Caesarstone worktop installation.
We regularly help customers with Caesarstone quartz worktop advice across Wigan, Appley Bridge, Standish, Chorley, Bolton, Preston, St Helens, Warrington, Ormskirk, Southport, Leigh, Manchester and surrounding North West areas.
